INSIZE 2843-10 ELECTRONIC SURFACE PROFILE GAUGE

Range: 0-.5"/0-12.7mm

Digital Indicator Stroke: .5"/12.7mm

The INSIZE 2843-10 Electronic Surface Profile Gage has the following specifications:

• Range: 0-.5″/0-12.7mm
• Digital Indicator Stroke: .5″/12.7mm
• Digital Indicator Resolution: .00005″/0.001mm
• Accuracy: ±.0002″

Features:

• Measure peak-to-valley height of blast cleaned surface. If the profile is too low, the adhesion of the coating to the surface will be reduced. If the profile is too high, there is the danger that the profile peaks will remain uncoated, allowing rust spots to occur.
• Does not display maximum and minimum differences on readout
• Meet ASTM D 4417-B
• Zero set block is included, set zero before measurement
• Button function: tolerance Go and No-Go display, data preset, measuring direction change, max./min./TIR measurement, inch/metric conversion, absolute/incremental measurement
• CR2032 battery, automatic power off
• Data output
• Stainless steel base
• Optional accessory: data output cable (code 7315-50M, 7302-40M, 7305-40M)

INSIZE Electronic Surface Profile Gage

• 2844-10 Electronic Surface Profile Gages 0-.5″/0-12.7mm (Can Display Maximum and Minimum Differences) 
• 2843-10 Electronic Surface Profile Gage 0-.5″/0-12.7mm